PH 13-8 Mo H1025
PH13-8 Mo H1025 is a martensitic precipitation-hardening stainless steel with a UNS designation of S13800. It is specifically heat-treated to produce this grade of PH13-8 Mo H1025. It has good strength and hardness with notable toughness and good resistance to corrosion.
PH13-8 Mo H1025 is made through a refining method of vacuum induction melting (VIM) and is electro-slag remelted (ESR) to very tightly control its composition. It is very low in carbon and has an exceptionally clean composition.
Heat Treatable to H1025
PH 13-8 Mo Precipitation Hardening Alloy is produced in the annealed condition. This is also called the solution heat treated condition, or Condition A. Solution treat from 1675 to 1725°F (910 to 940°C) for 15 to 30 minutes at temperature. Air cool or oil quench to below 60°F (15°C) to effect complete transformation to martensite. Aging is normally carried out from 950 to 1150°F (510 to 620°C), depending upon the desired final properties. Heat treatment is usually performed in air. Heat treatment of brazed components may be done in inert atmospheres. Reducing atmospheres should not be used because of the potential for hydrogen contamination
Applications of PH13-8 Mo H1025
PH13-8 Mo H1025 is widely used in:
- Landing Gear Components : struts, actuators, and load-bearing parts
- Nuclear Reactor Components : shafts, fasteners, and structural parts
- Petrochemical Industry : valves, shafts, and high-stress components
- Injection Molding Equipment : tooling requiring hardness and wear resistance
PH13-8 Mo STAINLESS STEEL SPECIFICATIONS
BARS & FORGINGS
High-strength maraging steel designed for structural aerospace and tooling components.
SHEET & PLATE
Flat products used for high-strength structural components and aerospace assemblies.
BOEING SPECIFICATIONS
Manufacturer standards ensuring compatibility with Boeing aerospace engineering requirements.
PH13-8Mo STAINLESS STEEL HEAT TREATING CONDITIONS
Manufacturer standards ensuring compatibility with Boeing aerospace engineering requirements.
Ultrasonic Testing
Non-destructive inspection standards used to verify internal material integrity.
Certified Material for Critical Service
Aerospace programs and high-performance industrial systems require strict compliance with recognized material standards. Fighter Jet Metals can supply PH13-8Mo stainless steel certified to AMS, ASTM, and major aerospace manufacturer specifications.
All materials are delivered with complete mill certifications, lot traceability, and inspection documentation, ensuring they meet the quality requirements for aerospace structures, engine components, and other critical service applications.